Matsushita CF-W4HWEZZBM User Manual download pdf (Page 19)

When the administrator

password is forgotten

When the previous item is

not the cause

Set the password again in the following procedure.

Windows XP

If you have created a password reset disk, a message is displayed when you fail to

correctly enter the password. Follow the message’ s instructions and set the password

again by using the password reset disk.

If you have not created a password reset disk, after reinstalling, setup Windows and then

set the password again.

Press F9 in the Setup Utility. This will restore the Setup Utility’s settings to their

default values (except the password settings).

Try removing all peripheral devices.

Check a disk error using the following procedure.

Display [Local Disk (C:) Properties].

Windows XP

Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select

[Properties] .

Select [Tools] - [Check Now].

Select [Start] after selecting required items in [Check disk options].

At startup, hold down F8 when [Panasonic] boot screen disappears, and release your

finger when the Windows Advanced Option Menu is displayed. Start the computer in

Safe Mode, and confirm the details of the error.

Starting Up (continued)

No display after powering on

The power has not been

turned off, but after a cer-

tain period of time, there is

no display

W hen the battery pack is

used, the screen is darker

than when the AC adaptor

is connected

The cursor cannot be con-

trolled properly

When there is no display to an external display ,

• Check your cable connection to the external display .

• Confirm your display is powered on.

• Check the settings for your external display .

The display destination may be set to the external display .

Try changing the display destination by pressing Fn + F3 .

If you want to switch the display destination repeatedly by pressing Fn + F3 , make

sure that the display destination has switched completely each time before pressing

Fn + F3 again.

Has the computer been set to the power-saving mode?

To resume operation of your computer from the condition the power of the display is off

(for energy conservation purposes), press any key unrelated to the direct triggering of a

selection, like Ctrl .

To save power, your computer may have automatically entered the standby mode (power

indicator blinks green) or hibernation mode (power indicator turns off). In such cases,

slide the power switch.

Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is

increased, the battery running time will become shorter .

Brightness can be set to separate levels for when the AC adaptor is connected and when

it is disconnected.

If you are using an external mouse, ensure that the external mouse has been connected

correctly .

Restart the computer by using the keyboard (Press , U , and select [Restart] with

, then press Enter ).

If the computer does not respond to keyboard commands, read “No response”

Display

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Comments to this Manuals

No comments

Matsushita CF-W4HWEZZBM User Manual Page 19

Comments to this Manuals